OSCam/en/examples/Sky HD and MTV-Unlimited: Unterschied zwischen den Versionen
Keine Bearbeitungszusammenfassung |
Wiwe (Diskussion | Beiträge) (→oscam.user: correction) |
||
(6 dazwischenliegende Versionen von 2 Benutzern werden nicht angezeigt) | |||
Zeile 1: | Zeile 1: | ||
[[Kategorie:OSCam]] | [[Kategorie:OSCam]] | ||
{{OSCamHomeLinks}} | |||
== Sky HD | == Sky GER HD, MTV-Unlimited, HD+ and TNTSAT == | ||
=== | === Basics === | ||
* 1x serial Cardreader with Sky GER Nagra 3 S02 SC (6,00 Mhz) SD CAID 1702, HD CAID 1833, Ident 000000 | |||
* 1x USB serial Cardreader with MTV-Unlimited Conax SC (3,57 Mhz) CAID 0B00, Ident 000000 | |||
* 1x USB serial Cardreader with HD+ Nagravison SC (3,68 Mhz) CAID 1830, Ident 000000,003411,008011 | |||
* 1x USB serial Cardreader with TNTSAT Viaccess SC (3,57 Mhz) CAID 0500, Ident 030B00,FFF400 | |||
* protocol understood by many clients and STBs: newcamd | |||
* | === Configuration === | ||
* | ==== oscam.conf ==== | ||
* | This is where we configure OScam for the newcamd protocol. We need the following values: | ||
* | * Choose a DES Key for newcamd protocol (14-byte value), e.g. 0102030405060708091011121314. | ||
* Choose a port for Sky SD CAID 1702, e.g. 12345. | |||
* Choose a port for MTV-Unlimited CAID 0B00, e.g. 23456. | |||
* Choose a port for HD+ CAID 1830, e.g. 34567. | |||
* Choose a port for TNTSAT CAID 0500, e.g. 45678. | |||
Now we write the newcamd configuration, specifying for each port the CAID and Idents. | |||
[global] | [global] | ||
Zeile 25: | Zeile 27: | ||
[newcamd] | [newcamd] | ||
key = 0102030405060708091011121314 | key = 0102030405060708091011121314 | ||
port = 12345@1702:000000,23456@0B00:000000;34567@1830:000000,003411,008011 | port = 12345@1702:000000,23456@0B00:000000;34567@1830:000000,003411,008011;45678@0500:030B00,FFF400 | ||
* | ==== oscam.server ==== | ||
* | * The frequencies for each card reader should be known. | ||
* | * We define a separate reader for each card, name must be unique. | ||
* Each reader is assigned a different group number. | |||
* For each reader we specify a caid, the idents, and a service name, to identify what card is stored in it. | |||
[reader] | [reader] | ||
Zeile 57: | Zeile 59: | ||
device = /dev/ttyUSB1 | device = /dev/ttyUSB1 | ||
protocol = mouse<br /> | protocol = mouse<br /> | ||
rsakey = < | rsakey = <Enter your RSA Key here> | ||
boxkey = < | boxkey = <Enter your Box Key here> | ||
label = reader2 | label = reader2 | ||
emmcache = 1,3,2 | emmcache = 1,3,2 | ||
Zeile 65: | Zeile 67: | ||
services = hdp | services = hdp | ||
group = 2<br /> | group = 2<br /> | ||
[reader] | |||
detect = CD | |||
device = /dev/ttyUSB2 | |||
protocol = mouse<br /> | |||
aeskeys = 0500@030B00:<Enter your AES Key here>,<Enter your AES Key here> | |||
label = reader3 | |||
emmcache = 1,3,2 | |||
caid = 0500 | |||
ident = 0500:030B00,FFF400 | |||
services = tntsat | |||
group = 3<br /> | |||
====oscam.user==== | ==== oscam.user ==== | ||
* | * Create for each receiver and each CAID its own accaount, associating it with the appropriate service and group. | ||
* | * All clients are configured for AutoUpdate. If it is not performed, the card validity is not extended. | ||
* | * Configure all Sky HD service IDs through betatunnel and map Sky HD CAID 1833 to Sky SD 1702. This way, the card will only receive requests for CAID 1702. | ||
[account] | [account] | ||
Zeile 86: | Zeile 99: | ||
group = 0 | group = 0 | ||
au = reader0 | au = reader0 | ||
betatunnel = 1833.007a:1702,1833.007b:1702,1833.007c:1702,1833.007e:1702,1833.007f:1702,1833.0080:1702,1833.0081:1702,1833.0082:1702,1833.0083:1702,1833.0084 ident = 1702:000000 | betatunnel = 1833.007a:1702,1833.007b:1702,1833.007c:1702,1833.007e:1702,1833.007f:1702,1833.0080:1702,1833.0081:1702,1833.0082:1702,1833.0083:1702,1833.0084 | ||
ident = 1702:000000 | |||
caid = 1702 | caid = 1702 | ||
services = sky<br /> | services = sky<br /> | ||
Zeile 121: | Zeile 135: | ||
caid = 1830 | caid = 1830 | ||
services = hdp<br /> | services = hdp<br /> | ||
[account] | |||
user = tntuser1 | |||
pwd = tntpassword1 | |||
group = 3 | |||
au = reader3 | |||
ident = 0500:030B00,FFF400 | |||
caid = 0500 | |||
services = tntsat<br /> | |||
[account] | |||
user = tntuser2 | |||
pwd = tntpassword2 | |||
group = 3 | |||
au = reader3 | |||
ident = 0500:030B00,FFF400 | |||
caid = 0500 | |||
services = tntsat<br /> | |||
You should avoid the abbreviation of the beta tunnel like so: | |||
"Betatunnel = 1833.FFFF:1702" | "Betatunnel = 1833.FFFF:1702" | ||
If the clients are not 100% identical, then caching would be bypassed. | |||
* | ==== oscam.services ==== | ||
* Definition of Services. | |||
[mtv] | [mtv] | ||
Zeile 143: | Zeile 172: | ||
caid=1830 | caid=1830 | ||
provid=000000,003411,008011 | provid=000000,003411,008011 | ||
srvid=EF10,EF11,EF14,EF15,EF74,EF75,EF76,EF77 | srvid=EF10,EF11,EF14,EF15,EF74,EF75,EF76,EF77<br /> | ||
[tntsat] | |||
caid=0500 | |||
provid=030B00,FFF400 | |||
srvid=1F41,1F44,1F48,1F4A,1FD8,200C,20A4,20B3,20B4,20B6,2261,2329,232A,23F7,2405,2407,240A,2458,245E,25E5,25E6,25E7,25E8,25E9,25EA,25EB,25EC,25ED,25EE,25EF,25F0,2649,264A,264B,264C,264D,264E,264F,2650,2651,2652,2653,2654,4284 | |||
=== | === Client connection with mgcamd === | ||
* Both Sky SD CAID 1702 and Sky HD CAID 1833 are accessed through '''one''' connection. | |||
* | * No additional mapping is required on the client side. | ||
* | * The mgcamd client supports AutoUpdate. | ||
* | * Add these lines to newcamd.list: | ||
* | |||
CWS = 192.168.178.1 12345 skyuser1 skypassword1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan server1 | CWS = 192.168.178.1 12345 skyuser1 skypassword1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan server1 | ||
CWS = 192.168.178.1 23456 mtvuser1 mtvpassword1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan | CWS = 192.168.178.1 23456 mtvuser1 mtvpassword1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan server2 | ||
CWS = 192.168.178.1 34567 hdpuser1 hdppassword1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan | CWS = 192.168.178.1 34567 hdpuser1 hdppassword1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan server3 | ||
CWS = 192.168.178.1 45678 tntuser1 tntpassword1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan server4 | |||
= | |||
* | === Client connection with CCcam === | ||
* | * Both Sky SD CAID 1702 and Sky HD CAID 1833 are accessed through '''one''' connection. | ||
* | * No additional mapping is required on the client side. | ||
* Add these lines to CCcam.cfg: | |||
N: 192.168.178.1 12345 skyuser1 skypassword1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 | N: 192.168.178.1 12345 skyuser1 skypassword1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 | ||
N: 192.168.178.1 23456 mtvuser1 mtvpassword1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 | N: 192.168.178.1 23456 mtvuser1 mtvpassword1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 | ||
N: 192.168.178.1 23456 hdpuser1 hdppassword1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 | N: 192.168.178.1 23456 hdpuser1 hdppassword1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 | ||
N: 192.168.178.1 23456 tntuser1 tntpassword1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 | |||
=== | === Client connection with OSCam DVB API === | ||
* Yes, we are using OScam as a client! | |||
* | * Both Sky SD CAID 1702 and Sky HD CAID 1833 are accessed through '''one''' connection. | ||
* | * OSCam DVB API supports AutoUpdate. | ||
* | |||
====oscam.conf==== | ==== oscam.conf ==== | ||
* No logging. | |||
* | * DVB API defined with AU. | ||
* DVB API | |||
[global] | [global] | ||
Zeile 185: | Zeile 215: | ||
user = dummyuser | user = dummyuser | ||
====oscam.user==== | ==== oscam.user ==== | ||
* User defined with AU. | |||
* | * User is assigned to all groups. | ||
* | * Betatunnel must be specified on the client side. | ||
* Betatunnel | |||
[account] | [account] | ||
Zeile 195: | Zeile 224: | ||
pwd = dummypassword | pwd = dummypassword | ||
betatunnel = 1833.007a:1702,1833.007b:1702,1833.007c:1702,1833.007e:1702,1833.007f:1702,1833.0080:1702,1833.0081:1702,1833.0082:1702,1833.0083:1702,1833.0084 | betatunnel = 1833.007a:1702,1833.007b:1702,1833.007c:1702,1833.007e:1702,1833.007f:1702,1833.0080:1702,1833.0081:1702,1833.0082:1702,1833.0083:1702,1833.0084 | ||
group = 0,1,2 | group = 0,1,2,3 | ||
au = 1 | au = 1 | ||
====oscam.server==== | ==== oscam.server ==== | ||
* Define a remote reader for each service. | |||
* | * We have EMM caching even on the client side. | ||
* | * Replace the IP address of the OSCam server on the '''device''' line to match your LAN configuration. | ||
[reader] | [reader] | ||
Zeile 207: | Zeile 236: | ||
device = 192.168.178.1,12345 | device = 192.168.178.1,12345 | ||
protocol = newcamd | protocol = newcamd | ||
user = skyuser1 | |||
password = skypassword1 | |||
key = 0102030405060708091011121314 | key = 0102030405060708091011121314 | ||
emmcache = 1,3,2 | emmcache = 1,3,2 | ||
Zeile 218: | Zeile 248: | ||
device = 192.168.178.1,23456 | device = 192.168.178.1,23456 | ||
protocol = newcamd | protocol = newcamd | ||
user = mtvuser1 | |||
password = mtvpassword1 | |||
key = 0102030405060708091011121314 | key = 0102030405060708091011121314 | ||
emmcache = 1,3,2 | emmcache = 1,3,2 | ||
Zeile 229: | Zeile 260: | ||
device = 192.168.178.1,34567 | device = 192.168.178.1,34567 | ||
protocol = newcamd | protocol = newcamd | ||
user = hdpuser1 | |||
password = hdppassword1 | |||
key = 0102030405060708091011121314 | key = 0102030405060708091011121314 | ||
emmcache = 1,3,2 | emmcache = 1,3,2 | ||
Zeile 236: | Zeile 268: | ||
services = hdp | services = hdp | ||
group = 2<br /> | group = 2<br /> | ||
[reader] | |||
label = reader3 | |||
device = 192.168.178.1,45678 | |||
protocol = newcamd | |||
user = tntuser1 | |||
password = tntpassword1 | |||
key = 0102030405060708091011121314 | |||
emmcache = 1,3,2 | |||
caid = 0500 | |||
ident = 0500:030B00,FFF400 | |||
services = tntsat | |||
group = 3<br /> | |||
====oscam.services==== | ==== oscam.services ==== | ||
* Copy from the server (see above). | |||
{{OSCamTranslatedLinks}} |
Aktuelle Version vom 18. November 2012, 15:14 Uhr
OSCam Übersicht OSCam Home OSCam Accueil OSCam Home
Sky GER HD, MTV-Unlimited, HD+ and TNTSAT
Basics
- 1x serial Cardreader with Sky GER Nagra 3 S02 SC (6,00 Mhz) SD CAID 1702, HD CAID 1833, Ident 000000
- 1x USB serial Cardreader with MTV-Unlimited Conax SC (3,57 Mhz) CAID 0B00, Ident 000000
- 1x USB serial Cardreader with HD+ Nagravison SC (3,68 Mhz) CAID 1830, Ident 000000,003411,008011
- 1x USB serial Cardreader with TNTSAT Viaccess SC (3,57 Mhz) CAID 0500, Ident 030B00,FFF400
- protocol understood by many clients and STBs: newcamd
Configuration
oscam.conf
This is where we configure OScam for the newcamd protocol. We need the following values:
- Choose a DES Key for newcamd protocol (14-byte value), e.g. 0102030405060708091011121314.
- Choose a port for Sky SD CAID 1702, e.g. 12345.
- Choose a port for MTV-Unlimited CAID 0B00, e.g. 23456.
- Choose a port for HD+ CAID 1830, e.g. 34567.
- Choose a port for TNTSAT CAID 0500, e.g. 45678.
Now we write the newcamd configuration, specifying for each port the CAID and Idents.
[global] nice = -1
logfile = /var/log/oscam.log usrfile = /var/log/oscamsuser.log
[newcamd] key = 0102030405060708091011121314 port = 12345@1702:000000,23456@0B00:000000;34567@1830:000000,003411,008011;45678@0500:030B00,FFF400
oscam.server
- The frequencies for each card reader should be known.
- We define a separate reader for each card, name must be unique.
- Each reader is assigned a different group number.
- For each reader we specify a caid, the idents, and a service name, to identify what card is stored in it.
[reader] detect = CD device = /dev/ttyS0 protocol = mouse
label = reader0 emmcache = 1,3,2 caid = 1702 ident = 1702:000000 services = sky group = 0
[reader] detect = CD device = /dev/ttyUSB0 protocol = mouse
label = reader1 emmcache = 1,3,2 caid = 0B00 ident = 0B00:000000 services = mtv_unlimited group = 1
[reader] detect = CD device = /dev/ttyUSB1 protocol = mouse
rsakey = <Enter your RSA Key here> boxkey = <Enter your Box Key here> label = reader2 emmcache = 1,3,2 caid = 1830 ident = 1830:000000,003411,008011 services = hdp group = 2
[reader] detect = CD device = /dev/ttyUSB2 protocol = mouse
aeskeys = 0500@030B00:<Enter your AES Key here>,<Enter your AES Key here> label = reader3 emmcache = 1,3,2 caid = 0500 ident = 0500:030B00,FFF400 services = tntsat group = 3
oscam.user
- Create for each receiver and each CAID its own accaount, associating it with the appropriate service and group.
- All clients are configured for AutoUpdate. If it is not performed, the card validity is not extended.
- Configure all Sky HD service IDs through betatunnel and map Sky HD CAID 1833 to Sky SD 1702. This way, the card will only receive requests for CAID 1702.
[account] user = skyuser1 pwd = skypassword1 group = 0 au = reader0 betatunnel = 1833.007a:1702,1833.007b:1702,1833.007c:1702,1833.007e:1702,1833.007f:1702,1833.0080:1702,1833.0081:1702,1833.0082:1702,1833.0083:1702,1833.0084:1702 ident = 1702:000000 caid = 1702 services = sky
[account] user = skyuser2 pwd = skypassword2 group = 0 au = reader0 betatunnel = 1833.007a:1702,1833.007b:1702,1833.007c:1702,1833.007e:1702,1833.007f:1702,1833.0080:1702,1833.0081:1702,1833.0082:1702,1833.0083:1702,1833.0084 ident = 1702:000000 caid = 1702 services = sky
[account] user = mtvuser1 pwd = mtvpassword1 group = 1 au = reader1 ident = 0B00:000000 caid = 0B00 services = mtv
[account] user = mtvuser2 pwd = mtvpassword2 group = 1 au = reader1 ident = 0B00:000000 caid = 0B00 services = mtv
[account] user = hdpuser1 pwd = hdppassword1 group = 2 au = reader2 ident = 1830:000000,003411,008011 caid = 1830 services = hdp
[account] user = hdpuser2 pwd = hdppassword2 group = 2 au = reader2 ident = 1830:000000,003411,008011 caid = 1830 services = hdp
[account] user = tntuser1 pwd = tntpassword1 group = 3 au = reader3 ident = 0500:030B00,FFF400 caid = 0500 services = tntsat
[account] user = tntuser2 pwd = tntpassword2 group = 3 au = reader3 ident = 0500:030B00,FFF400 caid = 0500 services = tntsat
You should avoid the abbreviation of the beta tunnel like so:
"Betatunnel = 1833.FFFF:1702"
If the clients are not 100% identical, then caching would be bypassed.
oscam.services
- Definition of Services.
[mtv] caid=0B00 provid=000000 srvid=6FEE,6FEF,6FF0,6FF1,6FF3,6FFA,6FFF
[sky] caid=1702 provid=000000 srvid=000C,000D,000E,000F,0010,0013,0015,0016,0017,0018,001A,001B,001C,001D,0022,0024,002A,0032,0034,00A8,0206,003C,003D,003E,003F,0040,0041,0042,0043,0044,07FF,2EFE,3331,3394,4461,4462,6FF1,7009,700A,0011,0035,00DD,00DE,00FD,0107,0111,011B,012F,0125,0139,0143,014D,016B,0175,006A,006B,006F,0070,0071,0072,0075,0077,0081,0082,0083,0084,00DF,00FC,0106,0110,011A,0124,012E,0138,0142,014C,0156,0160,0008,0009,0014,0019,0029,000A,000B,002B,0203,0204,0096,0097,0098,0099,009A,009B,009C
[hdp] caid=1830 provid=000000,003411,008011 srvid=EF10,EF11,EF14,EF15,EF74,EF75,EF76,EF77
[tntsat] caid=0500 provid=030B00,FFF400 srvid=1F41,1F44,1F48,1F4A,1FD8,200C,20A4,20B3,20B4,20B6,2261,2329,232A,23F7,2405,2407,240A,2458,245E,25E5,25E6,25E7,25E8,25E9,25EA,25EB,25EC,25ED,25EE,25EF,25F0,2649,264A,264B,264C,264D,264E,264F,2650,2651,2652,2653,2654,4284
Client connection with mgcamd
- Both Sky SD CAID 1702 and Sky HD CAID 1833 are accessed through one connection.
- No additional mapping is required on the client side.
- The mgcamd client supports AutoUpdate.
- Add these lines to newcamd.list:
CWS = 192.168.178.1 12345 skyuser1 skypassword1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan server1 CWS = 192.168.178.1 23456 mtvuser1 mtvpassword1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan server2 CWS = 192.168.178.1 34567 hdpuser1 hdppassword1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan server3 CWS = 192.168.178.1 45678 tntuser1 tntpassword1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan server4
Client connection with CCcam
- Both Sky SD CAID 1702 and Sky HD CAID 1833 are accessed through one connection.
- No additional mapping is required on the client side.
- Add these lines to CCcam.cfg:
N: 192.168.178.1 12345 skyuser1 skypassword1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 N: 192.168.178.1 23456 mtvuser1 mtvpassword1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 N: 192.168.178.1 23456 hdpuser1 hdppassword1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 N: 192.168.178.1 23456 tntuser1 tntpassword1 01 02 03 04 05 06 07 08 09 10 11 12 13 14
Client connection with OSCam DVB API
- Yes, we are using OScam as a client!
- Both Sky SD CAID 1702 and Sky HD CAID 1833 are accessed through one connection.
- OSCam DVB API supports AutoUpdate.
oscam.conf
- No logging.
- DVB API defined with AU.
[global] disablelog = 1 disableuserfile = 1
[dvbapi] enabled = 1 au = 1 user = dummyuser
oscam.user
- User defined with AU.
- User is assigned to all groups.
- Betatunnel must be specified on the client side.
[account] user = dummyuser pwd = dummypassword betatunnel = 1833.007a:1702,1833.007b:1702,1833.007c:1702,1833.007e:1702,1833.007f:1702,1833.0080:1702,1833.0081:1702,1833.0082:1702,1833.0083:1702,1833.0084 group = 0,1,2,3 au = 1
oscam.server
- Define a remote reader for each service.
- We have EMM caching even on the client side.
- Replace the IP address of the OSCam server on the device line to match your LAN configuration.
[reader] label = reader0 device = 192.168.178.1,12345 protocol = newcamd user = skyuser1 password = skypassword1 key = 0102030405060708091011121314 emmcache = 1,3,2 caid = 1702 ident = 1702:000000 services = sky group = 0
[reader] label = reader1 device = 192.168.178.1,23456 protocol = newcamd user = mtvuser1 password = mtvpassword1 key = 0102030405060708091011121314 emmcache = 1,3,2 caid = 0B00 ident = 0B00:000000 services = mtv group = 1
[reader] label = reader2 device = 192.168.178.1,34567 protocol = newcamd user = hdpuser1 password = hdppassword1 key = 0102030405060708091011121314 emmcache = 1,3,2 caid = 1830 ident = 1830:000000,003411,008011 services = hdp group = 2
[reader] label = reader3 device = 192.168.178.1,45678 protocol = newcamd user = tntuser1 password = tntpassword1 key = 0102030405060708091011121314 emmcache = 1,3,2 caid = 0500 ident = 0500:030B00,FFF400 services = tntsat group = 3
oscam.services
- Copy from the server (see above).
Diese Seite in anderen Sprachen - This page in other languages - Cette page dans d'autres langues - Queste pagine in altre Lingue
[[OSCam/de/{{#titleparts:OSCam/en/examples/Sky_HD_and_MTV-Unlimited|3|3}}|Deutsch]] [[OSCam/en/{{#titleparts:OSCam/en/examples/Sky_HD_and_MTV-Unlimited|3|3}}|English]] [[OSCam/fr/{{#titleparts:OSCam/en/examples/Sky_HD_and_MTV-Unlimited|3|3}}|Français]] [[OSCam/it/{{#titleparts:OSCam/en/examples/Sky_HD_and_MTV-Unlimited|3|3}}|Italiano]]