OSCam/it/Which protocols Card Reader and Cards are supported: Unterschied zwischen den Versionen

Aus Streamboard Wiki
Zur Navigation springen Zur Suche springen
 
(16 dazwischenliegende Versionen von 3 Benutzern werden nicht angezeigt)
Zeile 2: Zeile 2:
 
{{OSCamHomeLinks}}
 
{{OSCamHomeLinks}}
  
[[Datei:WarningS.png|text-bottom]] '''Attenzione:''' Il contenuto della traduzione in italiano e parzialmente in tedesco. Registrati e aiutaci a complementare e tradurre!
 
  
== Quali prtocolli vengono supportati ? ==
+
== Quali protocolli vengono supportati ? ==
 +
 
 +
=== Protocolli ===
 
Esistono due protocolli di base UDP e TCP:
 
Esistono due protocolli di base UDP e TCP:
  
* UDP significa che non esiste una connezzione fissa tra Client e server. Il client/server invia una richiesta/risposta in speranza che arrivi. non viene controllato se i dati sono arrivati.  
+
* UDP significa che non esiste una connessione fissa tra Client e server. Il client/server invia una richiesta/risposta in speranza che arrivi. non viene controllato se i dati sono arrivati.  
 +
 
 +
* TCP significa che viene fatta una connessione veloce attraverso sockets tra client e server. Con questa connessione si é sicuri che i dati siano veramente arrivati al destinatario. Ha più sicurezza rispetto a UDP ma é piu lento. Per il cs questo non é significativo per causa dei dati minimi, il vantaggio piu grande di TCP é che anche se si avessi una linea scarsa di internet la connessione resta molto stabile.
 +
 
 +
==== Protocolli supportati ====
 +
 
 +
* newcamd with cascading/remote server ECM support
 +
* camd 3.3x TCP
 +
* camd  3.5x  / 3.57x UDP with cascading/remote server ECM support, ECM and EMM support with size > 256 bytes
 +
* camd 3.78x TCP with cascading/remote server ECM support, ECM and EMM support with size > 256 bytes
 +
* CCcam with cascading/remote server ECM support, ECM and EMM support with size > 256 bytes
 +
* DVB API with multi tuner and PIP support
 +
* gbox with cascading/remote server ECM support
 +
* serial (HSIC, SSSP, BOMBA, DSR 9500)
 +
* radegast
  
* TCP significa che viene fatta una connezzione veloce attraverso sockets tra client e server. Con questa connezzione si é sicuri che i dati siano veramente arrivati al destinatario. Ha piu sicurezze che del UDP ed é piu lento. Per il cs questo non é significativo per causa dei dati minimi, il vantaggio piu grande di TCP é che anche se si avessi una linea scarsa di internet la connezzione resta molto stabile.
+
==== Options ====
  
  camd 3.3x (TCP)
+
* -a|--crash-dump =  write oscam.crash on segfault (needs installed GDB and OSCam compiled with debug infos -ggdb)
  camd 3.5x (UDP & TCP) con AU-Support
+
* -b|--daemon  =  starts in background, writing oscam.version with starttime and version info in temporary directory
  Newcamd (TCP) con AU-Support, Cascadib/remote server ECM support
+
* -B <filename>  =  set PID file, overrides pidfile of oscam.conf, default: none
  Radegast (?)
+
* -c|--config-dir <directory> =  read configuration from <directory>, default:see CS_CONFDIR in globals.h, while starting OSCam prints warnings on invalid keywords, comment lines start with # character.
  CCcam (TCP)
+
* -d|--debug <level>  =  debug level mask:
  GBox (?)
+
** 0 = no debugging (default)
  serial (HSIC, SSSP, BOMBA, DSR 9500)
+
** 2 = ATR parsing info, ECM dumps, CW dumps
  DVB API con AU, Multituner, e PIP-Support
+
** 4 = traffic from/to the reader
 +
** 8 = traffic from/to the clients
 +
** 16 = traffic to the reader-device on IFD layer
 +
** 32 = traffic to the reader-device on I/O layer
 +
** 64 = EMM logging
 +
** 128 = DVBAPI logging
 +
** 256 = load balancing logging
 +
** 512 = cache exchange logging
 +
** 1024 = client ECM logging
 +
** 2048 = CSP logging
 +
** 4096 = CWC logginga
 +
** 65535 = debug all
 +
* -g|--gcollect <mode>  =  garbage collector debug mode, default:none:
 +
** 1 = immediate free
 +
** 2 = check for double frees
 +
* -h|--help = usage
 +
* -I|--syslog-ident <ident> =  set syslog ident, default:oscam
 +
* -p|--pending-ecm <number> =  maximum number of pending ECM packets, default:32, maximum:255
 +
* -r|--restart <level> =  restart level:
 +
** 0 = disabled, restart request sets exit status to 99
 +
** 1 = restart activated, web interface can restart oscam (default)
 +
** 2 = like 1, but also restart on segmentation faults
 +
* -S|--show-sensitive  = do not filter sensitive info (card serial numbers) in the logs
 +
* -s|--capture-segfaults =  capture segmentation faults
 +
* -t|temp-dir <directory> =  use <directory> for temporary data, default:temporary directory of OS
 +
* -u|--utf8  =  enable output of web interface in UTF-8 charset
 +
* -V|--bild-info  = show OSCam version info
 +
* -w|--wait <seconds>  =  time waiting for system time to be set correctly
  
== Quali Card Reader vengono supportati ? ==
+
=== Card Reader ===
Una lista attuale si trova qui: http://streamboard.gmc.to:8001/wiki/DeviceList
+
Una lista attuale si trova qui: [[Streamboard:oscam/wiki/DeviceList|DeviceList]]
  
=== Seriale ===
+
==== Seriale ====
 
* Reader con protocollo Mouse  3,5 e 6 Mhz  
 
* Reader con protocollo Mouse  3,5 e 6 Mhz  
 
* Reader interni (per esempio Dreambox)
 
* Reader interni (per esempio Dreambox)
 
* reader possono esser collegati anche ad un serial-usb adattore
 
* reader possono esser collegati anche ad un serial-usb adattore
  
=== USB ===
+
==== USB ====
 
* Reader con Chip FTDI (per esempio  Smargo Smartreader+)
 
* Reader con Chip FTDI (per esempio  Smargo Smartreader+)
 
* Reader con Chip Prolific non possono essere overclocked
 
* Reader con Chip Prolific non possono essere overclocked
  
== Quali Cards vengono supportati? ==
+
=== Cards ===
Una lista attuale si trova qui: http://streamboard.gmc.to:8001/wiki/CardsList
+
Una lista attuale si trova qui: [[Streamboard:oscam/wiki/CardsList|CardsList]]
  
  
 
{{OSCamTranslatedLinks}}
 
{{OSCamTranslatedLinks}}

Aktuelle Version vom 12. Februar 2015, 18:41 Uhr

LanguageDE S.png OSCam Übersicht LanguageEN S.png OSCam Home LanguageFR S.png OSCam Accueil LanguageIT S.png OSCam Home


Quali protocolli vengono supportati ?

Protocolli

Esistono due protocolli di base UDP e TCP:

  • UDP significa che non esiste una connessione fissa tra Client e server. Il client/server invia una richiesta/risposta in speranza che arrivi. non viene controllato se i dati sono arrivati.
  • TCP significa che viene fatta una connessione veloce attraverso sockets tra client e server. Con questa connessione si é sicuri che i dati siano veramente arrivati al destinatario. Ha più sicurezza rispetto a UDP ma é piu lento. Per il cs questo non é significativo per causa dei dati minimi, il vantaggio piu grande di TCP é che anche se si avessi una linea scarsa di internet la connessione resta molto stabile.

Protocolli supportati

  • newcamd with cascading/remote server ECM support
  • camd 3.3x TCP
  • camd 3.5x / 3.57x UDP with cascading/remote server ECM support, ECM and EMM support with size > 256 bytes
  • camd 3.78x TCP with cascading/remote server ECM support, ECM and EMM support with size > 256 bytes
  • CCcam with cascading/remote server ECM support, ECM and EMM support with size > 256 bytes
  • DVB API with multi tuner and PIP support
  • gbox with cascading/remote server ECM support
  • serial (HSIC, SSSP, BOMBA, DSR 9500)
  • radegast

Options

  • -a|--crash-dump = write oscam.crash on segfault (needs installed GDB and OSCam compiled with debug infos -ggdb)
  • -b|--daemon = starts in background, writing oscam.version with starttime and version info in temporary directory
  • -B <filename> = set PID file, overrides pidfile of oscam.conf, default: none
  • -c|--config-dir <directory> = read configuration from <directory>, default:see CS_CONFDIR in globals.h, while starting OSCam prints warnings on invalid keywords, comment lines start with # character.
  • -d|--debug <level> = debug level mask:
    • 0 = no debugging (default)
    • 2 = ATR parsing info, ECM dumps, CW dumps
    • 4 = traffic from/to the reader
    • 8 = traffic from/to the clients
    • 16 = traffic to the reader-device on IFD layer
    • 32 = traffic to the reader-device on I/O layer
    • 64 = EMM logging
    • 128 = DVBAPI logging
    • 256 = load balancing logging
    • 512 = cache exchange logging
    • 1024 = client ECM logging
    • 2048 = CSP logging
    • 4096 = CWC logginga
    • 65535 = debug all
  • -g|--gcollect <mode> = garbage collector debug mode, default:none:
    • 1 = immediate free
    • 2 = check for double frees
  • -h|--help = usage
  • -I|--syslog-ident <ident> = set syslog ident, default:oscam
  • -p|--pending-ecm <number> = maximum number of pending ECM packets, default:32, maximum:255
  • -r|--restart <level> = restart level:
    • 0 = disabled, restart request sets exit status to 99
    • 1 = restart activated, web interface can restart oscam (default)
    • 2 = like 1, but also restart on segmentation faults
  • -S|--show-sensitive = do not filter sensitive info (card serial numbers) in the logs
  • -s|--capture-segfaults = capture segmentation faults
  • -t|temp-dir <directory> = use <directory> for temporary data, default:temporary directory of OS
  • -u|--utf8 = enable output of web interface in UTF-8 charset
  • -V|--bild-info = show OSCam version info
  • -w|--wait <seconds> = time waiting for system time to be set correctly

Card Reader

Una lista attuale si trova qui: DeviceList

Seriale

  • Reader con protocollo Mouse 3,5 e 6 Mhz
  • Reader interni (per esempio Dreambox)
  • reader possono esser collegati anche ad un serial-usb adattore

USB

  • Reader con Chip FTDI (per esempio Smargo Smartreader+)
  • Reader con Chip Prolific non possono essere overclocked

Cards

Una lista attuale si trova qui: CardsList


Diese Seite in anderen Sprachen - This page in other languages - Cette page dans d'autres langues - Queste pagine in altre Lingue

LanguageDE S.png [[OSCam/de/{{#titleparts:OSCam/it/Which_protocols_Card_Reader_and_Cards_are_supported|3|3}}|Deutsch]] LanguageEN S.png [[OSCam/en/{{#titleparts:OSCam/it/Which_protocols_Card_Reader_and_Cards_are_supported|3|3}}|English]] LanguageFR S.png [[OSCam/fr/{{#titleparts:OSCam/it/Which_protocols_Card_Reader_and_Cards_are_supported|3|3}}|Français]] LanguageIT S.png [[OSCam/it/{{#titleparts:OSCam/it/Which_protocols_Card_Reader_and_Cards_are_supported|3|3}}|Italiano]]