OSCam/en/Which protocols Card Reader and Cards are supported

Aus Streamboard Wiki
Zur Navigation springen Zur Suche springen

LanguageDE S.png OSCam Übersicht LanguageEN S.png OSCam Home LanguageFR S.png OSCam Accueil LanguageIT S.png OSCam Home

Which protocols, Card Reader and Cards are supported?

Protocolls

  • UDP = no firm connection between client and server sockets. No checking wheter all data packets have arrived.
  • TCP = firm connection between client and server sockets. Checking wheter all data packets have arrived. More overhead and therefore a little slower than UDP. However, this is irrelevant for the small amounts of data for CS. Great advantage: stable compounds in low Internet lines.

From OScam supported protocolls

  • newcamd with cascading/remote server ECM support
  • camd 3.3x TCP
  • camd 3.5x / 3.57x UDP with cascading/remote server ECM support, ECM and EMM support with size > 256 bytes
  • camd 3.78x TCP with cascading/remote server ECM support, ECM and EMM support with size > 256 bytes
  • CCcam with cascading/remote server ECM support, ECM and EMM support with size > 256 bytes
  • DVB API with multi tuner and PIP support
  • gbox with cascading/remote server ECM support
  • serial (HSIC, SSSP, BOMBA, DSR 9500)
  • radegast

Options

  • -a|--crash-dump = write oscam.crash on segfault (needs installed GDB and OSCam compiled with debug infos -ggdb)
  • -b|--daemon = starts in background, writing oscam.version with starttime and version info in temporary directory
  • -B <filename> = set PID file, overrides pidfile of oscam.conf, default: none
  • -c|--config-dir <directory> = read configuration from <directory>, default:see CS_CONFDIR in globals.h, while starting OSCam prints warnings on invalid keywords, comment lines start with # character.
  • -d|--debug <level> = debug level mask:
    • 0 = no debugging (default)
    • 2 = ATR parsing info, ECM dumps, CW dumps
    • 4 = traffic from/to the reader
    • 8 = traffic from/to the clients
    • 16 = traffic to the reader-device on IFD layer
    • 32 = traffic to the reader-device on I/O layer
    • 64 = EMM logging
    • 128 = DVBAPI logging
    • 256 = load balancing logging
    • 512 = cache exchange logging
    • 1024 = client ECM logging
    • 65535 = debug all
  • -g|--gcollect <mode> = garbage collector debug mode, default:none:
    • 1 = immediate free
    • 2 = check for double frees
  • -h|--help = usage
  • -I|--syslog-ident <ident> = set syslog ident, default:oscam
  • -p|--pending-ecm <number> = maximum number of pending ECM packets, default:32, maximum:255
  • -r|--restart <level> = restart level:
    • 0 = disabled, restart request sets exit status to 99
    • 1 = restart activated, web interface can restart oscam (default)
    • 2 = like 1, but also restart on segmentation faults
  • -S|--show-sensitive = do not filter sensitive info (card serial numbers) in the logs
  • -s|--capture-segfaults = capture segmentation faults
  • -t|temp-dir <directory> = use <directory> for temporary data, default:temporary directory of OS
  • -u|--utf8 = enable output of web interface in UTF-8 charset
  • -V|--bild-info = show OSCam version info
  • -w|--wait <seconds> = time waiting for system time to be set correctly

Card Reader

An updated list you will find here: DeviceList

Seriell

  • reader with Mouse protocol 3,5 or 6 Mhz clockspeed
  • intern Reader (z.B. Dreambox)
  • reader can also have a seral-USB adapter connection

USB

  • reader with FTDI Chipset (z.B. Smargo Smartreader+)
  • reader with Prolific Chipset, no overclocking possible!

Cards

A updated list you find here: CardsList


Diese Seite in anderen Sprachen - This page in other languages - Cette page dans d'autres langues - Queste pagine in altre Lingue

LanguageDE S.png [[OSCam/de/{{#titleparts:OSCam/en/Which_protocols_Card_Reader_and_Cards_are_supported|3|3}}|Deutsch]] LanguageEN S.png [[OSCam/en/{{#titleparts:OSCam/en/Which_protocols_Card_Reader_and_Cards_are_supported|3|3}}|English]] LanguageFR S.png [[OSCam/fr/{{#titleparts:OSCam/en/Which_protocols_Card_Reader_and_Cards_are_supported|3|3}}|Français]] LanguageIT S.png [[OSCam/it/{{#titleparts:OSCam/en/Which_protocols_Card_Reader_and_Cards_are_supported|3|3}}|Italiano]]