OSCam/en/Which protocols Card Reader and Cards are supported: Unterschied zwischen den Versionen
Zur Navigation springen
Zur Suche springen
Wiwe (Diskussion | Beiträge) |
Wiwe (Diskussion | Beiträge) (→Options: add logginglevels to -d) |
||
(2 dazwischenliegende Versionen desselben Benutzers werden nicht angezeigt) | |||
Zeile 23: | Zeile 23: | ||
==== Options ==== | ==== Options ==== | ||
* -a write oscam.crash on segfault (needs installed GDB and OSCam compiled with debug infos -ggdb) | * -a|--crash-dump = write oscam.crash on segfault (needs installed GDB and OSCam compiled with debug infos -ggdb) | ||
* -b starts in background, writing oscam.version with starttime and version info in temporary directory | * -b|--daemon = starts in background, writing oscam.version with starttime and version info in temporary directory | ||
* -c <directory> read configuration from <directory>, default:see CS_CONFDIR in globals.h, while starting OSCam prints warnings on invalid keywords, comment lines start with # character. | * -B <filename> = set PID file, overrides pidfile of oscam.conf, default: none | ||
* -d <level> debug level mask: | * -c|--config-dir <directory> = read configuration from <directory>, default:see CS_CONFDIR in globals.h, while starting OSCam prints warnings on invalid keywords, comment lines start with # character. | ||
* -d|--debug <level> = debug level mask: | |||
** 0 = no debugging (default) | ** 0 = no debugging (default) | ||
** 2 = ATR parsing info, ECM dumps, CW dumps | ** 2 = ATR parsing info, ECM dumps, CW dumps | ||
Zeile 38: | Zeile 39: | ||
** 512 = cache exchange logging | ** 512 = cache exchange logging | ||
** 1024 = client ECM logging | ** 1024 = client ECM logging | ||
** 2048 = CSP logging | |||
** 4096 = CWC logging | |||
** 65535 = debug all | ** 65535 = debug all | ||
* -g <mode> garbage collector debug mode, default:none: | * -g|--gcollect <mode> = garbage collector debug mode, default:none: | ||
** 1 = immediate free | ** 1 = immediate free | ||
** 2 = check for double frees | ** 2 = check for double frees | ||
* -h usage | * -h|--help = usage | ||
* -p <number> maximum number of pending ECM packets, default:32, maximum:255 | * -I|--syslog-ident <ident> = set syslog ident, default:oscam | ||
* -r <level> restart level: | * -p|--pending-ecm <number> = maximum number of pending ECM packets, default:32, maximum:255 | ||
* -r|--restart <level> = restart level: | |||
** 0 = disabled, restart request sets exit status to 99 | ** 0 = disabled, restart request sets exit status to 99 | ||
** 1 = restart activated, web interface can restart oscam (default) | ** 1 = restart activated, web interface can restart oscam (default) | ||
** 2 = like 1, but also restart on segmentation faults | ** 2 = like 1, but also restart on segmentation faults | ||
* -S do not filter sensitive info (card serial numbers) in the logs | * -S|--show-sensitive = do not filter sensitive info (card serial numbers) in the logs | ||
* -s capture segmentation faults | * -s|--capture-segfaults = capture segmentation faults | ||
* -t <directory> use <directory> for temporary data, default:temporary directory of OS | * -t|temp-dir <directory> = use <directory> for temporary data, default:temporary directory of OS | ||
* -u enable output of web interface in UTF-8 charset | * -u|--utf8 = enable output of web interface in UTF-8 charset | ||
* -V show OSCam version info | * -V|--bild-info = show OSCam version info | ||
* -w <seconds> time waiting for system time to be set correctly | * -w|--wait <seconds> = time waiting for system time to be set correctly | ||
=== Card Reader === | === Card Reader === |
Aktuelle Version vom 1. Februar 2014, 17:27 Uhr
OSCam Übersicht OSCam Home OSCam Accueil OSCam Home
Which protocols, Card Reader and Cards are supported?
Protocolls
- UDP = no firm connection between client and server sockets. No checking wheter all data packets have arrived.
- TCP = firm connection between client and server sockets. Checking wheter all data packets have arrived. More overhead and therefore a little slower than UDP. However, this is irrelevant for the small amounts of data for CS. Great advantage: stable compounds in low Internet lines.
From OScam supported protocolls
- newcamd with cascading/remote server ECM support
- camd 3.3x TCP
- camd 3.5x / 3.57x UDP with cascading/remote server ECM support, ECM and EMM support with size > 256 bytes
- camd 3.78x TCP with cascading/remote server ECM support, ECM and EMM support with size > 256 bytes
- CCcam with cascading/remote server ECM support, ECM and EMM support with size > 256 bytes
- DVB API with multi tuner and PIP support
- gbox with cascading/remote server ECM support
- serial (HSIC, SSSP, BOMBA, DSR 9500)
- radegast
Options
- -a|--crash-dump = write oscam.crash on segfault (needs installed GDB and OSCam compiled with debug infos -ggdb)
- -b|--daemon = starts in background, writing oscam.version with starttime and version info in temporary directory
- -B <filename> = set PID file, overrides pidfile of oscam.conf, default: none
- -c|--config-dir <directory> = read configuration from <directory>, default:see CS_CONFDIR in globals.h, while starting OSCam prints warnings on invalid keywords, comment lines start with # character.
- -d|--debug <level> = debug level mask:
- 0 = no debugging (default)
- 2 = ATR parsing info, ECM dumps, CW dumps
- 4 = traffic from/to the reader
- 8 = traffic from/to the clients
- 16 = traffic to the reader-device on IFD layer
- 32 = traffic to the reader-device on I/O layer
- 64 = EMM logging
- 128 = DVBAPI logging
- 256 = load balancing logging
- 512 = cache exchange logging
- 1024 = client ECM logging
- 2048 = CSP logging
- 4096 = CWC logging
- 65535 = debug all
- -g|--gcollect <mode> = garbage collector debug mode, default:none:
- 1 = immediate free
- 2 = check for double frees
- -h|--help = usage
- -I|--syslog-ident <ident> = set syslog ident, default:oscam
- -p|--pending-ecm <number> = maximum number of pending ECM packets, default:32, maximum:255
- -r|--restart <level> = restart level:
- 0 = disabled, restart request sets exit status to 99
- 1 = restart activated, web interface can restart oscam (default)
- 2 = like 1, but also restart on segmentation faults
- -S|--show-sensitive = do not filter sensitive info (card serial numbers) in the logs
- -s|--capture-segfaults = capture segmentation faults
- -t|temp-dir <directory> = use <directory> for temporary data, default:temporary directory of OS
- -u|--utf8 = enable output of web interface in UTF-8 charset
- -V|--bild-info = show OSCam version info
- -w|--wait <seconds> = time waiting for system time to be set correctly
Card Reader
An updated list you will find here: DeviceList
Seriell
- reader with Mouse protocol 3,5 or 6 Mhz clockspeed
- intern Reader (z.B. Dreambox)
- reader can also have a seral-USB adapter connection
USB
- reader with FTDI Chipset (z.B. Smargo Smartreader+)
- reader with Prolific Chipset, no overclocking possible!
Cards
A updated list you find here: CardsList
Diese Seite in anderen Sprachen - This page in other languages - Cette page dans d'autres langues - Queste pagine in altre Lingue
[[OSCam/de/{{#titleparts:OSCam/en/Which_protocols_Card_Reader_and_Cards_are_supported|3|3}}|Deutsch]] [[OSCam/en/{{#titleparts:OSCam/en/Which_protocols_Card_Reader_and_Cards_are_supported|3|3}}|English]] [[OSCam/fr/{{#titleparts:OSCam/en/Which_protocols_Card_Reader_and_Cards_are_supported|3|3}}|Français]] [[OSCam/it/{{#titleparts:OSCam/en/Which_protocols_Card_Reader_and_Cards_are_supported|3|3}}|Italiano]]