OSCam/en/Which protocols Card Reader and Cards are supported: Unterschied zwischen den Versionen

Aus Streamboard Wiki
Zur Navigation springen Zur Suche springen
(→‎Options: add logginglevels to -d)
 
(5 dazwischenliegende Versionen desselben Benutzers werden nicht angezeigt)
Zeile 9: Zeile 9:
 
* TCP = firm connection between client and server sockets. Checking wheter all data packets have arrived. More overhead and therefore a little slower than UDP. However, this is irrelevant for the small amounts of data for CS. Great advantage: stable compounds in low Internet lines.
 
* TCP = firm connection between client and server sockets. Checking wheter all data packets have arrived. More overhead and therefore a little slower than UDP. However, this is irrelevant for the small amounts of data for CS. Great advantage: stable compounds in low Internet lines.
  
=== From OScam supported protocolls ===  
+
==== From OScam supported protocolls ====  
  
 
* newcamd with cascading/remote server ECM support
 
* newcamd with cascading/remote server ECM support
Zeile 21: Zeile 21:
 
* radegast
 
* radegast
  
=== Options ===
+
==== Options ====
  
* -a write oscam.crash on segfault (needs installed GDB and OSCam compiled with debug infos -ggdb)
+
* -a|--crash-dump  =  write oscam.crash on segfault (needs installed GDB and OSCam compiled with debug infos -ggdb)
* -b starts in background, writing oscam.version with starttime and version info in temporary directory
+
* -b|--daemon  =  starts in background, writing oscam.version with starttime and version info in temporary directory
* -c <directory> read configuration from <directory>, default:see CS_CONFDIR in globals.h, while starting OSCam prints warnings on invalid keywords, comment lines start with # character.
+
* -B <filename>  =  set PID file, overrides pidfile of oscam.conf, default: none
* -d <level> debug level mask:
+
* -c|--config-dir <directory> read configuration from <directory>, default:see CS_CONFDIR in globals.h, while starting OSCam prints warnings on invalid keywords, comment lines start with # character.
 +
* -d|--debug <level> debug level mask:
 
** 0 = no debugging (default)
 
** 0 = no debugging (default)
 
** 2 = ATR parsing info, ECM dumps, CW dumps
 
** 2 = ATR parsing info, ECM dumps, CW dumps
Zeile 38: Zeile 39:
 
** 512 = cache exchange logging
 
** 512 = cache exchange logging
 
** 1024 = client ECM logging
 
** 1024 = client ECM logging
 +
** 2048 = CSP logging
 +
** 4096 = CWC logging
 
** 65535 = debug all
 
** 65535 = debug all
* -g <mode> garbage collector debug mode, default:none:
+
* -g|--gcollect <mode> garbage collector debug mode, default:none:
 
** 1 = immediate free
 
** 1 = immediate free
 
** 2 = check for double frees
 
** 2 = check for double frees
* -h usage
+
* -h|--help =  usage
* -p <number> maximum number of pending ECM packets, default:32, maximum:255
+
* -I|--syslog-ident <ident> =  set syslog ident, default:oscam
* -r <level> restart level:
+
* -p|--pending-ecm <number> maximum number of pending ECM packets, default:32, maximum:255
 +
* -r|--restart <level> restart level:
 
** 0 = disabled, restart request sets exit status to 99
 
** 0 = disabled, restart request sets exit status to 99
 
** 1 = restart activated, web interface can restart oscam (default)
 
** 1 = restart activated, web interface can restart oscam (default)
 
** 2 = like 1, but also restart on segmentation faults
 
** 2 = like 1, but also restart on segmentation faults
* -S do not filter sensitive info (card serial numbers) in the logs
+
* -S|--show-sensitive  =  do not filter sensitive info (card serial numbers) in the logs
* -s capture segmentation faults
+
* -s|--capture-segfaults  =  capture segmentation faults
* -t <directory> use <directory> for temporary data, default:temporary directory of OS
+
* -t|temp-dir <directory> use <directory> for temporary data, default:temporary directory of OS
* -u enable output of web interface in UTF-8 charset
+
* -u|--utf8  =  enable output of web interface in UTF-8 charset
* -V show OSCam version info
+
* -V|--bild-info  =  show OSCam version info
* -w <seconds> time waiting for system time to be set correctly
+
* -w|--wait <seconds> time waiting for system time to be set correctly
  
=== Which Card Reader are supported? ===
+
=== Card Reader ===
 
An updated list you will find here: [[Streamboard:oscam/wiki/DeviceList|DeviceList]]
 
An updated list you will find here: [[Streamboard:oscam/wiki/DeviceList|DeviceList]]
  
Zeile 67: Zeile 71:
 
* reader with Prolific Chipset, no overclocking possible!
 
* reader with Prolific Chipset, no overclocking possible!
  
=== Which Cards are supported? ===
+
=== Cards ===
 
A updated list you find here: [[Streamboard:oscam/wiki/CardsList|CardsList]]
 
A updated list you find here: [[Streamboard:oscam/wiki/CardsList|CardsList]]
  
  
 
{{OSCamTranslatedLinks}}
 
{{OSCamTranslatedLinks}}

Aktuelle Version vom 1. Februar 2014, 18:27 Uhr

LanguageDE S.png OSCam Übersicht LanguageEN S.png OSCam Home LanguageFR S.png OSCam Accueil LanguageIT S.png OSCam Home

Which protocols, Card Reader and Cards are supported?

Protocolls

  • UDP = no firm connection between client and server sockets. No checking wheter all data packets have arrived.
  • TCP = firm connection between client and server sockets. Checking wheter all data packets have arrived. More overhead and therefore a little slower than UDP. However, this is irrelevant for the small amounts of data for CS. Great advantage: stable compounds in low Internet lines.

From OScam supported protocolls

  • newcamd with cascading/remote server ECM support
  • camd 3.3x TCP
  • camd 3.5x / 3.57x UDP with cascading/remote server ECM support, ECM and EMM support with size > 256 bytes
  • camd 3.78x TCP with cascading/remote server ECM support, ECM and EMM support with size > 256 bytes
  • CCcam with cascading/remote server ECM support, ECM and EMM support with size > 256 bytes
  • DVB API with multi tuner and PIP support
  • gbox with cascading/remote server ECM support
  • serial (HSIC, SSSP, BOMBA, DSR 9500)
  • radegast

Options

  • -a|--crash-dump = write oscam.crash on segfault (needs installed GDB and OSCam compiled with debug infos -ggdb)
  • -b|--daemon = starts in background, writing oscam.version with starttime and version info in temporary directory
  • -B <filename> = set PID file, overrides pidfile of oscam.conf, default: none
  • -c|--config-dir <directory> = read configuration from <directory>, default:see CS_CONFDIR in globals.h, while starting OSCam prints warnings on invalid keywords, comment lines start with # character.
  • -d|--debug <level> = debug level mask:
    • 0 = no debugging (default)
    • 2 = ATR parsing info, ECM dumps, CW dumps
    • 4 = traffic from/to the reader
    • 8 = traffic from/to the clients
    • 16 = traffic to the reader-device on IFD layer
    • 32 = traffic to the reader-device on I/O layer
    • 64 = EMM logging
    • 128 = DVBAPI logging
    • 256 = load balancing logging
    • 512 = cache exchange logging
    • 1024 = client ECM logging
    • 2048 = CSP logging
    • 4096 = CWC logging
    • 65535 = debug all
  • -g|--gcollect <mode> = garbage collector debug mode, default:none:
    • 1 = immediate free
    • 2 = check for double frees
  • -h|--help = usage
  • -I|--syslog-ident <ident> = set syslog ident, default:oscam
  • -p|--pending-ecm <number> = maximum number of pending ECM packets, default:32, maximum:255
  • -r|--restart <level> = restart level:
    • 0 = disabled, restart request sets exit status to 99
    • 1 = restart activated, web interface can restart oscam (default)
    • 2 = like 1, but also restart on segmentation faults
  • -S|--show-sensitive = do not filter sensitive info (card serial numbers) in the logs
  • -s|--capture-segfaults = capture segmentation faults
  • -t|temp-dir <directory> = use <directory> for temporary data, default:temporary directory of OS
  • -u|--utf8 = enable output of web interface in UTF-8 charset
  • -V|--bild-info = show OSCam version info
  • -w|--wait <seconds> = time waiting for system time to be set correctly

Card Reader

An updated list you will find here: DeviceList

Seriell

  • reader with Mouse protocol 3,5 or 6 Mhz clockspeed
  • intern Reader (z.B. Dreambox)
  • reader can also have a seral-USB adapter connection

USB

  • reader with FTDI Chipset (z.B. Smargo Smartreader+)
  • reader with Prolific Chipset, no overclocking possible!

Cards

A updated list you find here: CardsList


Diese Seite in anderen Sprachen - This page in other languages - Cette page dans d'autres langues - Queste pagine in altre Lingue

LanguageDE S.png [[OSCam/de/{{#titleparts:OSCam/en/Which_protocols_Card_Reader_and_Cards_are_supported|3|3}}|Deutsch]] LanguageEN S.png [[OSCam/en/{{#titleparts:OSCam/en/Which_protocols_Card_Reader_and_Cards_are_supported|3|3}}|English]] LanguageFR S.png [[OSCam/fr/{{#titleparts:OSCam/en/Which_protocols_Card_Reader_and_Cards_are_supported|3|3}}|Français]] LanguageIT S.png [[OSCam/it/{{#titleparts:OSCam/en/Which_protocols_Card_Reader_and_Cards_are_supported|3|3}}|Italiano]]